Overview
This article provides instructions for connecting your Dymo label printer to Barti to print frame labels.
Supported Models
Devices
Dymo LabelWriter 550
Dymo LabelWriter 450, Dymo LabelWriter 450 Twin Turbo
Labels
Dymo 550 Series: Dymo 30373 and Dymo 30299
Dymo 450 Series: Dymo 30373
Requirements
Dymo Connect should be installed on the computer that will be connected to the label printer
Do not connect your label printer to your computer until after the Dymo Connect software download is complete. This is a requirement from Dymo.
Step 1 - Download and Install Dymo Connect
Skip this step if you already have Dymo Connect installed on your computer
The latest Dymo Connect software can be downloaded from their website
Follow the Dymo software installation steps
Step 2 - Open Dymo Connect
Open Dymo Connect
Plug in your label printer and turn it on
Dymo LabelWriter 550 series: Dymo Connect will show that the device is connected and will autodetect the label type
Dymo LabelWriter 450 series: Dymo Connect will show that the device is connected
Step 3 - Queue labels in Barti
In Barti, go to Billing > Inventory > Label Printing
Barti will show the connected label printer model and label type
For the Dymo LabelWriter 450 series, the label SKU and labels remaining will not be present
Search for desired frames by name or UPC
To add frames to the print queue, click the “+” on the left side of the results table
To remove frames from the print queue, click the “-” on the left side of the selected table
To modify the number of labels to be printed, edit in the selected table
To print, click “Send to Label Printer”
If you are using a Twin Turbo Labelwriter and do not want duplicate labels, ensure that labels are present only on one side of the device